1 2

tiger rock inc

AR-15 Extended Bolt Catch Release Lever

AR-15 Extended Bolt Catch Release Lever

AVAILABLE IMMEDIATELY

If you are running an AR Maglock system with a bolt catch we find that an extended bolt catch lever can really help speed up your reload times.  Works with most milspec AR bolt catches and some extended bolt catches.  Please check that this will work with your particular bolt catch

Features:

  • Mil-Spec
  • Ambidextrous
  • 6061-T6 Aluminum
  • Black Anodized finish
  • Fits: AR-15
View full details

INSTALLATION OF YOUR L-RAD SYSTEM

1. Treat Every Firearm as if It Is Loaded

2. Always Keep the Muzzle Pointed in a Safe Direction

3. Be Sure of Your Target and Aware of What Is Beyond 

4. Keep Your Finger Outside of the Trigger Guard Until You Are Ready to Shoot

Please make sure firearm is unloaded and barrel and chamber are clear of any live ammunition and loaded magazines.

Before proceeding we suggest that you consult a licensed gunsmith for installation.

INSTALLING YOUR L-RAD SYSTEM

You will need to remove your magazine button, spring and catch as well as your existing bolt catch.

For stripped lower builds proceed to step 1

STEP 1

Install the L-RAD bolt catch and punch in the roll pin with the proper gunsmithing tools.

Ensure that the bolt catch moves easily and without restrictions.

STEP 2

Once L-RAD is installed move the paddle towards the back of the receiver to the OFF position.

STEP 3

Install the L-RAD magazine catch.

Cannot be use with any other ambidextrous magazine catch or standard magazine catch

STEP 4

Install spring and the 2EZ magazine button

Use a screw driver to install the 2EZ magazine release button as you will not be able to spin the magazine catch to install the button

NOTE: If you are using your own magazine button you will need to install the L-RADmagazine catch, spring and button before you install the L-RAD bolt catch

STEP 5

Your L-RAD system is now installed.

Turn it to the on position when testing with live ammunition.